How To Flash / Install Firmware Lenovo A536.

 On this guide, I will explain to you how to flashing/Install firmware android on Lenovo A536 with easy and simple step. Flashing in android is the same way like fresh install on the windows PC, So by performing a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failed to install Stock ROM Mod. 

Do you know what is bootloop, Ok.. now I will explain to you what is bootloop. Some people say that bootloop is a problem that occured on an android system which the android system could not start up going to the homescreen menu. And it's happened is automatically return to the initial state on the first time when you turn on the Lenovo A536. And the device will stop to display on the smartphone logo.

So, If you have any problems on Lenovo A536 bootloop or accidental Lenovo A536 is not installed recovery. In this guide I'm not offering recovery twrp or Cwm. CMW is a recovery that already in recovery mode for customization of the device such that the Lenovo A536 with a variety of additional functions in it such as backup / restore, installations and others that are not contained in the standard recovery mode. Generally, in case of a default recovery bootloop Lenovo A536 will go missing in case of bootloop. whereas the original recoery can not help when there hardbrick.

Now, follow the isntruction list bellow, do it with your own risk.

Files Need For the Operation

1. Firmware Lenovo A536: Download
• 
  
2. Latest Version of flash tool : Download
• 
  
3. Lenovo A536 USB Driver : Download 
• 
  
4. To ensure what is firmware used by your device, you can check by go to Setting ->About -> Software Information ->Build Number.

Flashing Lenovo A536.

1. At the first time, please Install driver for Lenovo A536 that already downloaded before. 
2. Extract the other downloaded file (firmware and flash tool) save in anywhere on your hard drive.
3. Then remove your back case, battery, sim card and SD Card  if installed
4. Next, Connect your Lenovo A536 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
5. Then, release USB data cable from the PC.
6. Open SP flash tool software and click scatter load. find Lenovo A536 scatter storage location earlier.
7. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt 

   

   Flash / Install Firmware Lenovo A536.

8. Then you click options ->Download -> then check DA DL all with checksum.

   

   Flash / Install Firmware Lenovo A536.

9. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

   

   Flash / Install Firmware Lenovo A536.

10. Then, click download button on top right and connect your Lenovo A536 with USB cable in phone switch off position.
    
    

    

    Flash / Install Firmware Lenovo A536.

11. Process will run automatic, and you can see the red stripe showing download percentage at bellow
12. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware Lenovo A536.

13. Now disconnect your Lenovo A536
14. Intall you battery again. 
15. Then, start your Lenovo A536. (remember, on the first booting it will take a long time to start)
16. Success. enjoy

Sharing is sexy! Do share with your darlings.

ADS HERE !!!