contacts number
+8801725000669
somadhantelecom@yahoo.com
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:20,
Signal Pin:21, 22, 23, 24,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:22 D-:23
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM20
Driver Name->>>SPRD U2S Diag
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.2
>>> Mobile Info
Flash ID:0x00EF004000000000
Flash Name:SF_W25Q32BV
Flash Size:0x00400000 -> 4M
CPU Name:6531
Baud Rate is Switched To:921600
>>> Reading Flash...
Reality Flash Size£ยบ0x00400000 -> 4M
All Done...
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.