Today I Will Share You How To Solve Common Error Facing In Androd Phone

Some people still find it difficult while others simply don't understand what to do when they face some problems or errors with their device or while using sp flash tool

Learn how to use sp flash tool from here

S_FT_ENABLE_DRAM_FAIL (4032)
This sometimes occurs when you are trying to flash a wrong ROM to your device.

If you are sure that the firmware you are using is the exact one of your device, format the phone before you flash it.

S_NOT_ENOUGH_STORAGE_SPACE (1011)
This error pops up when size of the firmware (ROM) you are trying to flash is bigger than the space given on the phone.

Try using another version of sp flash tool. Sometimes this error occurs when using a wrong ROM.

S_UNSUPPORTED_OPERATION (1040)
The scatter file loaded is wrong. load the scatter file of your device.

S_COM_PORT_OPEN_FAIL (1003)
This error is seen when the com ports on your PC are disabled.

Try enabling com ports in your BIOS

S_COM_PORT_OPEN_FAIL (1013)
This error is just almost like the the 1003 error. Check if your com ports are available if not enable them. But most of the time using a new version of SP Flash Tool solves this problem.

S_UNSUPPORTED_VER_OF_DA (1022)
If you get this error, Use a newer version of SP Flash Tool.

S_DA_EXT_RAM_ERROR (3001)
Connection problems. Check USB cord or use another port.

S_DA_EMMC_FLASH_NOT_FOUND (3144)
Wrong scatter file used

S_FT_DOWNLOAD_FAIL (4008)
Change USB cord or

Use Battery to flash the phone or

Change the version of SP Flash Tool. (Older versions preferable)

S_INVALID_DA_FILE (5002)
Use another version of SP Flash Tool

Device boots and hangs on logo
Device gets error messages like com.android.xxxxxx process has stopped.
Device boots and enters recovery mode (mostly happens after using OTA to update a rooted device)

First try a factory reset

To factory reset your device, boot into recovery by holding volume up and power button for about 3secs select factory reset from the list. (If you see the green android man, press volume up and power button again)

you can as well boot into the Chinese recovery by holding volume down and power button for about 3secs then select eMMC from the list.

If the solution above does not work for the device then you will have to flash the device using sp flash tool.

Download the stock ROM of the device. Download stock ROMs from here
Load the scatter file in sp flash tool

Flash only system.img that is tick only Android on the list shown sp flash tool after loading scatter file.

Click Download and connect your device.

Wait for the process to complete.

If device just vibrates when you press power button.
Do a full flash.

Download the stock ROM of the device. Download stock ROMs from here
Load the scatter file in sp flash tool
Select all the images present.
Click Download
Connect device and wait for process to complete.

If device displays " Unlock privacy protection password "
Do the following below
Format the device before Download.
To format the device,
Download ROM of device.
Load scatter file of the device.
Goto Format tab and click Start button.
Connect the device and wait for process to complete.
Disconnect your device
Now enter back the Download tab and click Download button
Connect your your device and wait for flash process to complete.

Second Method

Donwload Miracle box Setup Or Crack From here

open it and navigate to mtk

tab on unlock/fix

check clear Anti-theft

click start botton

conect ur devices

while holding volume down key

wait still proccess complete

remove the usb cable

an power ON device

note: it may take upto 10-15 minite to boot...

ADS HERE !!!